DANA 50, 60 FRONT, 10 BOLT DIFFERENTIAL COVER
P/N 10737
Price for as-cast finish: $190.00 
Price for black powder coating: $235.00
Price for polished part: $300.00
PML Dana 50/60 front differential cover fits 1999 and newer Super Duty Fords and 94-02 Dodge Ram 2500 and 3500 vehicles.
On the Ford trucks, this diff cover is slightly deeper than the stock covers. This part is shallower than our Dana 60, 70 rear cover (P/N 9426) for more steering linkage clearance.
For Dodge Ram 2500 and 3500 vehicles, please check the cover dimensions and look at your trackbar bracket before ordering. If your stock cover has a vent fitting (instead of having a vent on the differential housing), this differential cover cannot be used.
PML has discontinued an older version of this cover, P/N 9866, which fits 99-04 Super Duty Fords. We do still have 1 polished 9866 cover in stock. This is in our Specials section. It is slightly different in shape.
For 1997 and older F250/350 trucks, neither P/N 9866 or 10737 will clear the ring gear. Our standard Dana 60, 70 (P/N 9426) rear cover will clear the ring gear but you’ll need to check your vehicle for steering linkage clearance with this deeper cover.
Has drain and fill/level check holes.
Volume: 0.6 qt. over stock
Click here for dimensions. A separate window will open and load a pdf file.
For a larger picture, please click one of the above images. A separate window will open showing a bigger picture. (The larger pictures take a minute to display.)
PML Differential Cover Features:
- Increased oil capacity for cooler temperatures
- Sand-cast aluminum with raised fins
- 3/16-inch thick wall construction to add strength to differential housing
- 3/8-inch thick gasket flange will not bend when bolts are tightened
- Machined gasket surface for a secure seal using RTV or factory reuseable gasket
- Oil changes without removing the cover
- All hardware provided, including magnetic drain plug
