DANA 44 10 BOLT DIFFERENTIAL COVER
P/N 9516
This cover has three holes. The bottom hole is a drain hole. The plug at the top is used to fill the differential. The one on the side is left open when filling to let you know when the differential is full. Once oil starts to drip out the side hole, it's full.
If you are planning to use this on a front differential, please check the dimensions on this cover and be sure you have enough room for a larger than stock cover. The steering linkage moves forward and backward (in addition to side to side) as you turn the steering wheel so you'll need to figure out how far from the diff cover it is when it's closest.
Volume: 0.25 qt. over stock
Click here for dimensions.
Price for as-cast finish: $155.00 
Price for black powder coating: $195.00
Price for polished part: $265.00
For a larger picture, please click one of the above images. A separate window will open showing a bigger picture. (The larger pictures take a minute to display.)
PML Differential Cover Features:
- Increased oil capacity for cooler temperatures
- Sand-cast aluminum with raised fins
- 3/16-inch thick wall construction to add strength to differential housing
- 3/8-inch thick gasket flange will not bend when bolts are tightened
- Machined gasket surface for a secure seal using RTV or factory reuseable gasket
- Oil changes without removing the cover
- All hardware provided, including magnetic drain plug
