PML Transmission Pans, Valve and Differential Covers

Sand-Cast Aluminum Transmission Pans

PML Transmission Pans Features:

  • Increased oil capacity with deep pans for reduced oil temperature
  • Sand-cast aluminum with raised fins
  • Thick wall construction to add strength to transmission case
  • Thick gasket flange will not bend when bolts are tightened
  • Machined gasket surface for a secure seal
  • Most pans have a boss cast into pan that can be machined for a temperature sensor
  • Magnetic drain plug for easier, less messy maintenance
  • Mounting hardware provided

All pans are available in As-Cast Aluminum, Powder-Coated, or Polished Finishes. Price varies with finish. Gasket and filter not included (use stock parts).

Need an automatic transmission controller? PML recommends the HGM controller, COMPUSHIFT. Click here for information.

Not sure what transmission you have? Call your dealer parts department with your VIN number to verify.

Transmission Pan Applications:

Dodge Applications (click on an item for more information):
DODGE 68RFE, 545RFE, 45RFE DEEP - P/N 10304
DODGE 68RFE, 545RFE, 45RFE EXTRA DEEP - P/N 11039
DODGE 727 (36RH, 37RH), 518 (46RH, 46RE), 618 (47RH, 47RE), 48RE, DEEP - P/N 9393
DODGE A500 (40RH, 42RH, 42RE, 44RE)  DEEP - P/N 9862


Ford Applications (click on an item for more information):
FORD 4R44E, 4R55E, 5R55E, A4LD DEEP - P/N 9614-2
FORD AOD, AODE, 4R70, 4R75 LOW PROFILE - P/N 9324
FORD AOD, AODE, 4R70, 4R75 DEEP - P/N 9685
FORD C4 DEEP - P/N 10453
FORD C6 DEEP - P/N 9592
FORD E4OD, 4R100 2WD & 4WD DEEP - P/N 9323
FORD 5R110 TORQSHIFT DEEP - P/N 9973


GM Applications (click on an item for more information):
ALLISON 1000 DEEP - P/N 9517
CORVETTE 4L60E DEEP - P/N 8650-3
GM 200-4R, DEEP - P/N 9917
GM 4T60E, 4T65E LOW PROFILE - P/N 10758
GM 425 FRONT WHEEL DRIVE TRANSAXLE - P/N 7873
GM 4L80E, 4L85E DEEP, EARLY - P/N 9167
GM 4L80E, 4L85E DEEP, LATE, & HUMMER - P/N 9437
GM 4L80E, 4L85E LOW PROFILE - P/N 9313
GM 700R4, 4L60, 4L60E, 4L65E, 4L70E DEEP, EARLY - P/N 8650-1
GM 700R4, 4L60, 4L60E, 4L65E LOW PROFILE - P/N 9297
GM 700R4, 4L60E, 4L65E, 4L70E DEEP, LATE - P/N 9427
GM TURBO 350 DEEP - P/N 9684
GM TURBO 350 LOW PROFILE - P/N 9589
GM TURBO 400 DEEP - P/N 9683
GM TURBO 400 LOW PROFILE - P/N 9591

Nissan Applications (click on an item for more information):
NISSAN RE5-R50A DEEP - P/N 11037

PML quality machined covers and pans are thoroughly tested to ensure form, fit and function before they go into production. Dimensions are approximate and are provided for reference only. Please call if you have concerns with clearance.

PML can drill and tap a hole for a temperature sensor or gauge. Please call for details.

Transmission Pan Installation Instructions (click on item below and a separate window will open and load the PDF file):

Click here to view a PDF file of a cross-reference between some transmissions and makes/models.

Corvette
Check out our Corvette Pans!

Made in the USA
PML, Inc.
201 West Beach Avenue
Inglewood, CA 90302
(310) 671-4345
www.YourCovers.com
yourcovers@pmli.com

Member
Copyright 2006, PML, Inc.