These specials are Corvette Big Block Valve Covers, Polish Finish (P/N 9096). See our page on this part for information and regular pricing (click here).

These parts fit and function correctly but have cosmetic defects. We have itemized each part and provided pictures as best as possible. These are individual covers. You will need to pick two to make a set.

These parts cannot be returned. They are sold as-is.

Information about these parts is given in these catagories:

• Booster or No Booster: "Booster" means the cover has a cutout for the brake booster side of the engine
• Fins: describes the fins
• Lettering: describes the lettering
• Body: describes the body
• Flange Thickness: there are two different thickness for the flange (3/16 and 3/8 inch)
• Breather/PCV Holes: describes anything around the hole
• Needs Cleaning: if yes, the part is dirty and needs to be cleaned before it is installed. Dirty parts generally have polishing compound on them. This washes off with soap and water.
• Baffle: riveted or cast-in
• Other: any other information about the part and its condition
• Price: price for the single cover (not for a set)
• Images: click to view images of the part

Special #3

• Booster
• Fins:
  (1) Pinprick to 1/16-inch porosity: on left side of all fins, fin above r and v, and on fin under e
  (2) 3/16-inch porosity: on left middle fin
• Lettering: Pinprick porosity mostly on C
• Body:
  (1) Pinprick to 1/8-inch porosity on upper left
  (2) Pinprick to 1/16-inch porosity above t and t
  (3) Pinprick porosity under t and t
• Flange Thickness: 3/16-inch
• Breather/PCV Hole: Pinprick porosity
• Needs Cleaning: Yes
• Baffle: Riveted
• Other: No other notes
• Price: $100
• Images: Special #3

Special #16

• Booster
• Fins: Pinprick to 1/16-inch porosity on left side of fins
• Lettering: Pinprick to 1/16-inch porosity on C and o
• Body: Pinprick to 1/16-inch porosity along bottom of the body and top left of body and right of body
• Flange Thickness: 3/16-inch
• Breather/PCV Hole: Pinprick to 1/16-inch porosity
• Needs Cleaning: Yes
• Baffle: Riveted
• Other: No other notes
• Price: $100
• Images: Special #16

Special #17

• Booster
• Fins: 3/16 x 1/8 inch porosity in fin above o and 1/8-inch porosity near 3rd fin on left and pinprick to 1/8-inch posority on bottom fin under v
• Lettering: Good
• Body: Pinprick to 1/16-inch porosity on left side and upper right corner and 1/8-inch porosity on flange top left near bolt hole
• Flange Thickness: 3/16-inch
• Breather/PCV Hole: Pinprick porosity
• Needs Cleaning: Yes
• Baffle: Riveted
• Other: No other notes
• Price: $100
• Images: Special #17

Special #19

• Booster
• Fins: Good except for pinprick to 1/8-inch porosity on top left fin
• Lettering: Good
• Body: Material removed above C and 1/16- to 1/8-inch porosity on top left of body. Top left of flange have 3/16- to 1/8-inch porosity
• Flange Thickness: 3/8-inch
• Breather/PCV Hole: Pinprick to 1/16-inch porosity
• Needs Cleaning: No
• Baffle: Riveted
• Other: No other notes
• Price: $100
• Images: Special #19

Special #113

• Booster
• Fins: Good
• Lettering: Good
• Body: Grind marks above lettering
• Flange Thickness: 3/8-inch
• Breather/PCV Hole: Good
• Needs Cleaning: No
• Baffle: Cast-in
• Other: No other notes
• Price: $100
• Images: Special #113

Special #114

• Booster
• Fins: Good
• Lettering: Good
• Body: Porosity on end opposite booster
• Flange Thickness: 3/8-inch
• Breather/PCV Hole: Good
• Needs Cleaning: Yes
• Baffle: Cast-in
• Other: No other notes
• Price: $100
• Images: Special #114, Picture 1
• Images: Special #114, Picture 2