We have some small block Chevy, pre-1986, perimeter mount valve covers with CHEVROLET script, no fins, on sale. These are sets. (We have individual single covers on special also.) These have some problem or defect as described below. These covers fit and function correctly.

For reference, see the regular Chevrolet script valve covers.

The PML part number is 8357-1.

If you want PML to machine a hole for PCV, breather or oil fill, there is an additional cost. Let us know when you order.

These parts cannot be returned. They are sold as-is. Please call to order.

---

Special #100 - Chevrolet Script, Polished, Set

One cover of special #100 has a machined PCV hole (1 inch thru) with grommet. This cover also has an indentation near the "C". The cover without the PCV hole has a chip on the rim and a small dent on the side. Both covers have cast-in baffles.

Price: $200.00 for the set

---

Special #101 - Chevrolet Script, Polished, Set

Inside of cover.

Break in rim.

Special #101 has old style baffles. No PCV holes are machined. One cover has a break in the rim near the corner and a scratch near a bolt hole. The other cover has a small ridge at either end of the script on the top.

Price: $200.00 for the set

---

Special #103 - Chevrolet Script, Polished, Set

Note scratches, top surface, right corner.

One image shows scratches near PCV hole and the other shows weld marks (slight discoloration) above "o" and "l" and porosity above "C".

Special #103 has old style baffles (like #101). One cover has a 1" thru hole machined for PCV. This cover has some scratches on the top right corner, top left corner (not pictured), and near PCV hole. The other cover has weld marks and some porosity all over, most noticibly top-center, and the cutouts near the bolt holes on the gasket edge on one side are missing.

Price: $200.00 for the set

---