GM 4T60E, 4T65E LOW PROFILE TRANSMISSION PAN
P/N 10758
- Buick Century, LeSabre, Park Avenue, Regal, Terraza
- Cadillac Deville
- Chevrolet Lumina, Monte Carlo, Impala SS
- Pontiac Bonneville, Grand Prix, Montana, Trans Sport
- Oldsmobile Silhouette
- Saturn Relay
This pan features raised fins to help with cooling and a boss that can be drilled for a temperature sensor.
The bolt hole size varies with the vehicle. Please measure your bolt thread diameter and order the correct part for your needs. P/N 10758-1 is for 6mm bolt holes and P/N 10758-2 is for 8mm bolt holes.
Volume: stock
Depth with fins: 1 1/3 inches . Click here for a pdf file with dimensions. A separate window will open and load the pdf file.
Image Not Available
Image Not Available
Price for as-cast finish: $200.00
For P/N 10758-1 (6mm bolts): 
For P/N 10758-2 (8mm bolts):
Price for black powder coating: $240.00
For P/N 10758-1 (6mm bolts):
For P/N 10758-2 (8mm bolts):
Price for polished part: $310.00
For P/N 10758-1 (6mm bolts):
For P/N 10758-2 (8mm bolts):
For a larger picture, please click one of the above images. A separate window will open showing a bigger picture. (The larger pictures take a minute to display.)
PML Transmission Pan Features:
- Sand-cast aluminum with raised fins
- 3/16-inch thick wall construction to add strength to the transmission case
- 3/8-inch thick gasket flange will not bend when bolts are tightened
- Machined gasket surface for a secure seal
- Boss cast into pan can be machined for a temperature sensor
- Magnetic drain plug for easier, less messy maintenance
- Mounting hardware provided
Gasket and filter not included (use stock parts).
If you would like PML to machine your pan for a temperature sensor, there is an additional charge of $35. Please place your order over the phone if you would like machining.
