FORD AOD, AODE, 4R70E, 4R70W, 4R75E, 4R75W LOW PROFILE TRANSMISSION PAN
P/N 9324
On applications where the exhaust is routed close to the passenger side of the trans pan (Mustang and some others), please check to be sure there is room for the drain plug boss. The drain plug is on the passenger side of the pan, and it’s boss sticks out almost as far as the gasket flange.
For information on differences between AOD, AODE, 4R70 (4R70W , 4R70E), and 4R75 (4R75W, 4R75E) transmissions and the filter requirements for this pan, click here. Select AOD or AODE, 4R70, 4R75 when you order.
A Ford reusable gasket should not be used with this pan. An aftermarket flat gasket is recommended and should be available in any auto parts store.
Volume: 0.5 qts. more than stock for AOD, stock capacity for AODE, 4R70, 4R75
Click here for dimensions.
Price for as-cast finish: $175.00
For AOD, click here: 
For AODE, 4R70, 4R75, click here:
Price for black powder coating: $215.00
For AOD, click here:
For AODE, 4R70, 4R75, click here:
Price for polished part: $285.00
For AOD, click here:
For AODE, 4R70, 4R75, click here:
For a larger picture, please click one of the above images. A separate window will open showing a bigger picture. (The larger pictures take a minute to display.)
PML Transmission Pan Features:
- Sand-cast aluminum with raised fins
- 3/16-inch thick wall construction to add strength to the transmission case
- 3/8-inch thick gasket flange will not bend when bolts are tightened
- Machined gasket surface for a secure seal
- Boss cast into pan can be machined for a temperature sensor
- Magnetic drain plug for easier, less messy maintenance
- Mounting hardware provided
Gasket and filter not included (use stock parts).
If you would like PML to machine your pan for a temperature sensor, there is an additional charge of $35. Please place your order over the phone if you would like machining.
