DODGE 727 (36RH, 37RH), 518 (46RH, 46RE), 618 (47RH, 47RE), 48RE, DEEP TRANSMISSION PAN

Fits all 1989-2007 Dodge Ram trucks with 5.9 Cummins diesel or V10 engines and some models with V8 gas engines from the late 1960’s until 2001. For 2007 and newer 6.7 Cummins diesel trucks, please see our Dodge 68RFE transmission pan.

Also fits two wheel drive Durango with 5.9 V8, two wheel drive Dakota with 5.9 V8, some V8 powered Ram vans. Four wheel drive Durango & Dakota will likely have exhaust and frame clearance problems with this pan.

This transmission pan works with these transmissions:

• 518, A518 (46RH, 46RE)
• 618, A618 (47RH, 47RE)
• 727, A727 (36RH, 37RH)
• 48RE

This pan is one inch deeper than stock. There is plenty of mixing of fluid due to vehicle movement as well as the fluid being sucked into the filter and returned from the oil cooler to prevent a stagnant layer at the bottom, so no filter extension is needed. Other companies that supply a filter extension are making pans that are deeper than this one.

Volume: 2 qts. over stock

Click here for dimensions.

Price for as-cast finish: $205.00

Price for black powder coating: $245.00

Price for polished part: $315.00

For a larger picture, please click one of the above images. A separate window will open showing a bigger picture. (The larger pictures take a minute to display.)

PML Transmission Pan Features:

• Increased oil capacity for cooler temperatures
• Sand-cast aluminum with raised fins
• 3/16-inch thick wall construction to add strength to the transmission case
• 3/8-inch thick gasket flange will not bend when bolts are tightened
• Machined gasket surface for a secure seal
• Boss cast into pan can be machined for a temperature sensor
• Magnetic drain plug for easier, less messy maintenance
• Mounting hardware provided

Gasket and filter not included (use stock parts).

If you would like PML to machine your pan for a temperature sensor, there is an additional charge of $35. Please place your order over the phone if you would like machining.