ALLISON 1000 DEEP TRANSMISSION PAN
P/N 9517
Fits 2001 to present Chevrolet & GMC full size trucks with the Allison 1000 5 & 6 speed automatic transmission. This transmission is found in the Silverado & Sierra 2500HD & 3500 with the Duramax diesel and 8.1 liter gas engines.
The pan features filter supports that are an integral part of the floor. Out of the box they are set up to work with the stock filter. The supports can also be shortened to work with the deeper filter that Allison offers for this transmission. The filter supports are designed to be easy to alter. For the larger filter you'll need to cut the filter supports at the line designed into them for that purpose. See this image. After cutting the supports you'll have to make sure you use the deeper filter from then on as the stock filter would fall out of the valve body.
The pan has a boss that can be machined for a temperature sensor.
We have a picture of this pan on a transmission built by Sun Coast Converters. The pan is cut-away so the picture shows the filter supports holding the filter. Click here to view. For more information on Sun Coast Converters see http://www.suncoastconverters.com/. (Thanks for sending us the picture.)
Volume: 3.25 qts. over stock
Click here for dimensions.
Price for as-cast finish: $220.00 
Price for black powder coating: $260.00
Price for polished part: $330.00
For a larger picture, please click one of the above images. A separate window will open showing a bigger picture. (The larger pictures take a minute to display.)
PML Transmission Pan Features:
- Increased oil capacity for cooler temperatures
- Sand-cast aluminum with raised fins
- 3/16-inch thick wall construction to add strength to the transmission case
- 3/8-inch thick gasket flange will not bend when bolts are tightened
- Machined gasket surface for a secure seal
- Boss cast into pan can be machined for a temperature sensor
- Magnetic drain plug for easier, less messy maintenance
- Mounting hardware provided
Gasket and filter not included (use stock parts).
If you would like PML to machine your pan for a temperature sensor, there is an additional charge of $35. Please place your order over the phone if you would like machining.
