FORD 5R110 TORQSHIFT^TM DEEP TRANSMISSION PAN

Price for as-cast finish: $220.00

Price for black powder coating: $260.00

Price for polished part: $330.00

PML designed this deep pan to help the TorqShift transmission better handle the high stresses of towing and hauling. It fits the 5R110 automatic transmission used in the F250, F350, F450, F550, E350, and E450 with these engines:

• 2003-2007 with 6.0 Power Stroke diesel
• 2005-2007 with 5.4 V8 and 6.8 V10

Ford has made some changes in the stock pan and filter for 2008. If you have an external spin-on transmission oil filter near the bell housing, this pan will work. If you do not have this external filter, do not order this pan. PML is designing a new pan to suit the new larger internal filter used in the applications without an external filter.

This pan has two possible locations for a temperature sensor. There is a boss on the driver's side (visible on the right side of the as-cast image) and there is a boss on the passenger's side opposite the drain hole. These do not come machined.

The pan has cast-in filter supports.  Click here to view a picture of the inside of the pan in a separate window.

Volume: 4.5 qts. over stock

Click here for dimensions.

For a larger picture, please click one of the above images. A separate window will open showing a bigger picture. (The larger pictures take a minute to display.)

PML Transmission Pan Features:

• Increased oil capacity for cooler temperatures
• Sand-cast aluminum with raised fins
• 3/16-inch thick wall construction to add strength to the transmission case
• 3/8-inch thick gasket flange will not bend when bolts are tightened
• Machined gasket surface for a secure seal
• Boss cast into pan can be machined for a temperature sensor
• Magnetic drain plug for easier, less messy maintenance
• Mounting hardware provided

Gasket and filter not included (use stock parts).

If you would like PML to machine your pan for a temperature sensor, there is an additional charge of $35. Please place your order over the phone if you would like machining.