PML Transmission Pans, Valve and Differential Covers

SMALL BLOCK CHEVYTM, PRE-1986, CHEVROLET® SCRIPT AND FINS VALVE COVERS

Sand Cast
P/N 10430
This is a perimeter mount style valve cover for pre-1986 heads. Mid-height design clears most roller rockers. Valve cover features cast-in baffling.
PML Valve Cover, SBC with script and fins
Click on image to enlarge.		 At the prices shown below, the covers will not have a hole for PCV, breather, or oil fill. They do have a recessed location on the intake manifold side that can be machined for this purpose. The PCV/breather hole goes on the wide side of the baffle.

Please place your order over the phone if you would like us to machine a PCV, breather or oil fill hole.

Click here for a pdf file with dimensions. A separate window will open and load the file. Please check dimensions to verify clearance for your application.
PML GM Licensing Stamp
 PML Valve Covers - Tall, Chevrolet Small Block PML Valve Covers - Tall, Chevrolet Small BlockPML GM Licensing Stamp PML Chevy Valve CoversPML GM Licensing Stamp
As-cast finish

Price for as-cast finish: $215.00/set of two

Price for powder coated finish: $315.00/set of two

Orange powder coated (top)

Black powder coated (bottom)

Polished finish

Price for polished part: $375.00/set of two


For a larger picture, please click one of the above images. A separate window will open showing a bigger picture. (The larger pictures take a minute to display.)

PML Valve Cover Features:

  • Strong sand-cast aluminum construction
  • Thick side walls and gasket flanges that will not bend when bolts are tightened
  • Cast-in internal baffles
  • Mounting hardware included

General Motors Trademarks are used under license to PML, Inc.

Made in the USA
PML, Inc.
201 West Beach Avenue
Inglewood, CA 90302
(310) 671-4345
www.YourCovers.com
yourcovers@pmli.com

Member
Copyright 2006, PML, Inc.