PML Transmission Pans, Valve and Differential Covers

SMALL BLOCK CHEVYTM, PRE-1986, CORVETTE® SCRIPT AND FINS VALVE COVERS

Sand Cast
P/N 11026

This is a perimeter mount style valve cover for pre-1986 heads. It has classic CORVETTE script and 7 fins. Mid-height design clears most roller rockers.

We have some of these on special. Please see our valve covers specials page.

Valve cover features cast-in baffling.
PML Valve Cover, SBC with script and fins
Click on image to enlarge.		 At the prices shown below, the covers will not have a hole for PCV, breather, or oil fill. They do have a recessed location on the intake manifold side that can be machined for this purpose. The PCV/breather hole goes on the wide side of the baffle.

Please place your order over the phone if you would like us to machine a PCV, breather or oil fill hole.

Click here for a pdf file with dimensions. A separate window will open and load the file. Please check dimensions to verify clearance for your application.
PML SBC Corvette Valve CoverPML GM Licensing Stamp
 PML SBC Corvette Valve CoverPML GM Licensing Stamp PML SBC Corvette Valve Cover - PolishedPML GM Licensing Stamp
As-cast finish

Price for as-cast finish: $215.00/set of two

Price for powder coated finish: $315.00/set of two

Orange powder coated (top)

Black powder coated (bottom)

Polished finish

Price for polished part: $375.00/set of two


For a larger picture, please click one of the above images. A separate window will open showing a bigger picture. (The larger pictures take a minute to display.)

PML Valve Cover Features:

  • Strong sand-cast aluminum construction
  • Thick side walls and gasket flanges that will not bend when bolts are tightened
  • Cast-in internal baffles
  • Mounting hardware included

General Motors Trademarks are used under license to PML, Inc.

Made in the USA
PML, Inc.
201 West Beach Avenue
Inglewood, CA 90302
(310) 671-4345
www.YourCovers.com
yourcovers@pmli.com

Member
Copyright 2006, PML, Inc.