SMALL BLOCK CHEVY^TM, 1987-1998 CENTER BOLT, RAISED CORVETTE® SCRIPT AND FINS VALVE COVERS

Price for as-cast finish: $215.00/set of two

Orange powder coated (top)

Black powder coated (bottom)

Price for polished part: $375.00/set of two

These valve covers feature vintage CORVETTE script lettering and fins for a classic appearance The script and lettering are raised These covers will fit Chevys with center bolt heads, such as many crate engines, and 1987-1998 Silverado, Sierra, Suburban, Tahoe, Corvette, Impala SS, and Camaro Z28.

Also available with fins-only design or CHEVROLET script.

PML designed these covers so that the top surface where the fins and lettering are is completely clean.

The design removed two bolts and the PCV/breather/oil fill holes from the top surface and added the script and fins. The sand cast aluminum construction is so much stiffer than stock that you do not need four bolts to apply pressure evenly to the gasket. If holes are needed for PCV, oil fill or breathers, they can be cut into the intake side of the valve cover. Baffles are cast into the interior of the cover in two locations opposite where the holes would go. Please see this jpg file showing the internal baffles and a machined hole. There is a machining charge for holes. Call to order if you require machining.

These cover are slightly taller than stock to allow roller tip rockers and are designed to use the stock gasket. Dimensions are available in a PDF file. Click here.

12/14/2007 Ordering Update: The initial order sold out but we are taking orders for shipping late January 2008.

For a larger picture, please click one of the above images. A separate window will open showing a bigger picture. (The larger pictures take a minute to display.)

PML Valve Cover Features:

• Strong sand-cast aluminum construction
• Thick side walls and gasket flanges that will not bend when bolts are tightened
• Cast-in internal baffles
• Mounting hardware included

General Motors Trademarks are used under license to PML, Inc.