PML logo PML differential cover PML transmission pan PML valve covers



Infomacion en EspaƱol

Process Credit Cards

GM 200-4R Stock Capacity
Transmission Pan

P/N 11070

PML GM 200-4R stock capacity tranny pan, as-cast
Click on image to view larger.

PML GM 200-4R stock capacity tranny pan, powder coated
Click on image to view larger.

PML GM 200-4R stock capacity tranny pan, polished
Click on image to view larger.

As-cast finish
Go To Cart
Black powder coating
Go To Cart
Polished finish
Go To Cart

Volume: Stock

Dimensions: Click here for dimensions. Overall height is 3 1/8 inches. Although this pan is stock capacity, it is still larger than the stock pan. Always check your vehicle for clearance before ordering.

Number of Bolts: 16

This PML pan fits many models of rear wheel drive cars with 4-speed automatic transmissions. GM used this transmission from 1982-1990. Examples of vehicles using the 200-4R transmissions are:

  • Buick Regal T Type
  • Grand National
  • Chevrolet Monte Carlo SS

The 200-4R (also know as the 200 R4) transmission is popular replacement transmission for high performance applications.

PML designed this pan to meet the demands of high performance cars that require a lower profile than our extra capacity 200-4R deep pan. The pan has several improvements over a stock pan: stiff construction, fins and aluminum material for cooling, drain hole, temperature sensor boss, thick machined gasket flange for a secure seal, and filter supports

Inside of PML 200 4R Pan

PML GM 200-4R stock capacity pan filter supports

Click on image to see a larger picture of the inside of the pan. A separate window will open and load the image.

The four rectangular areas on the bottom of the pan are the filter supports. The drain is at the top, right of the picture.

Filter Information

PML 200 4R transmission pans have filter supports so a filter extension is not needed.

The supports hold the filter at the same level as the stock pan. The distance from the bottom of the stock pan to the top of the flange is 2.4 to 2.6 inches. The distance from PML filter supports to the top of the flange is the same. The stock filter is about 4.8 inches tall. This shows the inside of the stock and PML 200 4R pans:

Filters 200 4R pan

This PML pan works with stock filters. Some customers have reported to us that a 700R4 filter may also work with our 200 4R transmission pans.

Filters 200 4R pan

Filter information is provided for reference only. Installer should verify transmission, filter and fitment based on the individual vehicle.

PML Transmission Pan Compared to Stock

PML Transmission Pan Part Number 9917_11070 height compared to stock  PML Transmission Pan Part Numbers 9917_11070, compared to stock
Click on image to view larger.

These images show this PML transmission pan compared to the stock pan.

Installations of PML 200 4R Transmission Pan

We have a few images of this stock capacity PML transmission pan installed.

PML Transmission Pan on California Kid Car

PML GM 200-4R transmission oil pan installed on the California Kid car

The California Kid car installed PML's 200-4R stock capacity pan. They used a custom powder coat to match the car. Even with a car this low, our pan works. David had to smash his face against the pavement to get the inset picture of the pan.

PML Transmission Pan on a 1969 Pontiac Firebird

Gordon installed this stock capacity PML pan for the 200 4R transmission during the restoration of his 1969 Pontiac Firebird. Our thanks to Gordon for sharing his pictures.

Pontiac Firebird with GM 200 4R transmission   Pontiac Firebird with PML 200 4R transmission pan installed, rear view   Pontiac Firebird with PML 200 4R transmission pan installed, front view

PML Transmission Pan Features:

  • Sand-cast aluminum with raised fins
  • 3/16-inch thick wall construction to add strength to the transmission case
  • 3/8-inch thick gasket flange will not bend when bolts are tightened
  • Machined gasket surface for a secure seal
  • Boss cast into pan can be machined for a temperature sensor
  • Drain hole and magnetic drain plug for easier, less messy maintenance

All PML transmission pans ship with new mounting bolts and a magnetic drain plug.

If you would like PML to machine your pan for a temperature sending unit, there is an additional charge of $40.

Find out why you should buy a PML transmission pan.

Learn more about finishes and construction of PML parts.

For a larger picture, please click on one of the above images. A separate window or tab will open showing a bigger picture. (The larger pictures take a minute to display.)