PML Transmission Pan For Nissan RE5R05A
For 350Z, Infiniti, Trucks with Skid Plates
|Black powder coating
Volume: 1 to 1.5 qts. over stock
Dimensions: are in this pdf file. This pan is 2 5/8 from the gasket surface to the top of the fins. Always check your vehicle to verify transmission and clearance as PML does have a restocking fee.
Number of Bolts: 22
This heavy duty transmission oil pan fits the Nissan RE5R05A transmission. This pan features:
PML designed this pan for Titan trucks with clearance concerns and 350Z cars. This pan has been installed on:
Scroll down to see installations of this pan further down on this page. Many Infiniti models and some new Hyundai vehicles use this transmission but we do not have information on interference from cross members or exhaust for all models. This pan might also work on the Nissan Fairlady.
In September 2012, PML moved the drain plug to the side of the pan. The bottom location is still possible so please call if the side drain will not work for your vehicle. The drain plug is on the passenger side toward the rear.
Frontier, Pathfinder and Xterra also use this transmission but we have heard that cross members that interfer with a larger pan. PML plans to work on a pan to accomodate the cross members.
We have a deep Nissan RE5R05A pan that is 3.5 quarts over stock.
We have one of these pans on special: Special #260
Filter and Gasket Information
The filter on the RE5R05A is a screen, and it bolts on to the valve body of the transmission so no filter supports or extentions are needed.
This transmission pan works with stock gaskets. These are usually about $25 from your local Nissan dealer. For example, the Nissan part number is 3139790X0A for 2007 and newer Titans or 3139790X00 for 2003 to 2007 Titans.
Inside of Pan
Image shows the inside of the pan.
The four thicker cast-in areas on the sides of the pan are the bosses.
The drain plug is in the boss shown on the bottom left of the picture. This is the passenger side toward the rear.
The other three bosses can be used for drilling and tapping a hole for a temperature sending unit.
Machining for Temperature Sensors
The pan has locations on the driver's and passenger's sides that can be drilled and tapped for aftermarket sensors and gages. Some Titan trucks come with a transmission temperature gauge that works independent of the transmission pan. If you would like PML to machine the pan for an aftermarket temperature sensor, the machining charge is $45 . The boss can accomodate 1/8 NPT to 1/2 NPT.
PML Transmission Pan Compared to Stock
These images show this PML transmission pan compared to the stock pan.
Installation of a PML pan on a 2006 Titan. Our thanks to Mike for the images and feedback.
This video shows the installation of the PML transmission pan on an Infiniti G35:
This pan has the drain on the side of the pan. It can optionally be moved to the bottom, as shown in this installation video.
Infiniti QX56 2010
This pan has the drain on the side of the pan. It can optionally be moved to the bottom, as shown above.
Installation of the for cars, trucks with skid plates PML transmission for the Nissan RE5R05A on a Navara 2.5 Diesel in Malaysia. Pan finish is the natural cast finish. The customer reported that installing the PML pan overcame the Navara's overheating problem.
The Navara is not sold in the US but it is similar to a Frontier. PML deep pan for the Nissan RE5R05A has also been installed on the Navara.
This pan has the drain on the side of the pan. It can optionally be moved to the bottom as shown in this installation.
In the side view picture at the immediate left, you can see that this pan does not hang below the cross member.
Our thanks to Jack and Nick who ordered and installed our pan and emailed us this picture.
Infiniti G37 Coupe 2008
Image shows this PML transmission pan installed on a 2008 Infiniti G37 Coupe.
Click on image to view larger.
PML Transmission Pan Features
All PML transmission pans ship with new mounting bolts and a magnetic drain plug.
If you would like PML to machine your pan for a temperature sending unit, there is an additional charge of $45 .
Learn more about finishes and construction of PML parts.
For a larger picture, please click on one of the above images. A separate window or tab will open showing a bigger picture. (The larger pictures take a minute to display.)
||PML, Inc. 201 W. Beach Avenue Inglewood, CA 90302 310-671-4345 www.YourCovers.com firstname.lastname@example.org||
Copyright 2000-2018, PML, Inc.