PML yourcovers.com logo PML differential cover PML transmission pan PML valve covers

Products

Info

Infomacion en EspaƱol

Process Credit Cards

PML Valve Covers For Small Block Chevy™ Engines, Perimiter Mount, Ford Oval Ford Logo

Part Number 8357-6

Oval Ford logo is purchased separately and included.

We have limited quantities. This part is discontinued. Please email yourcovers@pmli.com or call 310-671-4345 to order.

PML Ford Oval Valve Covers, Small Block Chevy, As-Cast Finish
Click on image to view larger.

PML Ford Oval Valve Covers, Small Block Chevy, Polished
Click on image to view larger.

As-Cast Finish
$340.00 with PCV, Breather Holes
$240.00 without
Polished Finish
$540.00 with PCV, Breather Holes
$440.00 without

Dimensions: Click here for dimensions in a pdf file. A separate window will open and load the file.

Finishes: Read about finishes and construction of PML parts.

These are standard perimeter mount covers for 1959 to 1986 small block Chevrolet® engines. The oval pad and fins are cast into the cover and are raised. On powder coated parts, the powder coat is shaved off the top of the fins.

These covers feature a mid-height design that will clear most roller rockers. Please check dimensions in above link to verify clearance for your particular configurationand see our web page on fitting PML valve covers on small block Chevy engines for examples.

These covers are designed to accomodate the oval Ford logo (which is purchased separately), and you can use the pad for your own logo or other design. Engines get hot so be sure to use a logo and adhensive that will withstand the heat. The pad on the casting is 3.15" by 1.6".

These covers feature a mid-height design that will clear most roller and/or ratio rockers. Please check dimensions in above link to verify clearance for your particular configuration. As noted in the dimensions, the fins add to the overall outside height of the cover.

These PML valve covers are standard perimeter mount covers for 1960 to 1986 small block Chevy engines (265, 283, 327, 350, 400). The bolt holes are straight across from each other (not offset or staggered).

Optional PCV, Breather and Oil Fill Holes

PML Valve Covers, hole location

PML makes these valve covers without holes. If needed, the covers can be machined for PCV, breather, or oil fill on the intake manifold side. PML can machine holes for an additional charge.

Please read this PDF file on oil fill, breather and PCV set-up.

Please call for information about our machining services on these valve covers.

Roller Rockers

These PML valve covers work with many engine configurations and roller rocker systems. If you have something other than stock, see our web page on fitting PML valve covers on small block Chevy engines.

PML Valve Covers Installed on a Cabriolet

PML Valve Covers, Ford Logo, Small Block Chevy Engine

Valve covers installed on a 1934 Ford Cabriolet. Thank you to Mr. Henderson for sending us pictures.

PML Valve Cover Features

  • Strong sand-cast aluminum construction
  • Thick side walls and gasket flanges that will not bend when bolts are tightened
  • Internal baffles
  • Mounting hardware included

For a larger picture, please click one of the above images. A separate window will open showing a bigger picture. (The larger pictures take a minute to display.)

Learn more about finishes and construction of PML parts.

General Motors Trademarks are used under license to PML, Inc.